I can’t get my open faced fishing reel to cast. What do I do?
Written by Josh on January 12, 2009 – 8:57 pm -
I used countless times addressed the open coil. My new that I bought won 't. jet I tried everything I could think a. Feels like it closes up. I have even run the line down the pole several times. He came with the line on the reel. He could be on the wrong line of reel?
Tags: Fishing Reel, Locks, Several Times
Posted in FAQs |
By donall520 on Jan 14, 2009 | Reply
Remove the current line completely coil and re-spool with fresh line of suitable weight. There? should solve your dilemma or provide a clue to your current problem.
By James W on Jan 16, 2009 | Reply
If there 'round S.A. or a knot on the line, there 'possibility of SA that your casting distance will be cut short. The lines will form cakes cycles on reels spinning and those cycles could be buried somewhere in the line. Bolt your line out as you can then revealing more line out by hand. You don 't need of revealing too much online. If there 'round S.A. or a knot buried under the line, you can stain rather quickly. Once otteneste disentangle the cycle, your distance casting should improve. It is better to bare your line directly into the water. If you put your bare line on dry land, there 'highest probability of SA that the line will form into a ball and aggroviglierà.
By KIKEENONO on Jan 16, 2009 | Reply
I agree with Donallo 52, which is better revealing just the line and start with a fresh line may be that the line is now above is not suitable for the coil in question may be too old line, and if the convinceste to work you can just pop it out if you get a big fish above. I used reels and flipping so that a node or a line wrapped cake residue of the coil may even induce a coil of casting does not work correctly.
By Joe American usn ret. on Jan 17, 2009 | Reply
won 't jet? the bar closes on you? Or the line just does not fly out of the coil Gradica should? What kind of roll - brand? Also as heavy? the line? Which line brand?
By jtexas on Jan 19, 2009 | Reply
spool spinning or baitcasting?